OBSOLETE GE GENUIS IC693TCM302 (FANUC) TEMP CONTROL MODULEEnhanced Genius Communications Module
GE Fanuc is the manufacturer of IC693TCM303.Itis one of the Temperature Control Modules or TCM. TCM provides temperature control for as many as eight channels. There are two identical models for TCM differing in resolution ratings and temperature range. The TCM comes with important features, including its ability to operate in a closed loop or open loop mode. It can relay an output and a thermocouple for each of the terminals and has a voltage capability of 12V in common mode. It can report and detect for a reverse and open thermocouple, and can also report and detect when the temperature is out of tolerance.
QUICK DETAILS
Module Type: Thermocouple Input
Output Voltage Range: 18 to 30 volts DC
Load Current: 100 mA per point
No. of Channels: 8 T/C In and 8 DC out
Internal Power Used: 150 mA @ 5 VDC
DC Power: Yes
The module has two plug-in connectors. They connect the external power source for the output relays, RTD and the field devices (such as thermocouples and relays). Terminals with captive screw are on the connectors. It makes field wiring a connection easy. The front cover of the module comes with a label of each terminal’s signal name for every available connector. Left-hand side connectors are specifically for input connections, and right-hand side connectors are for output connections. LED indicators are present to indicate the current state of the module. The states include External Power or P, Run or R, Fault or F, Short or S, and Output Status (1-8). The IC693TCM303 is an extended or upgraded range of the IC693TCM302. The temperature range for Thermocouple J and Thermocouple L for IC693TCM303 is 0°C to 750°C. Temperature ranges for Thermocouple R for IC693TCM302/303 are 0°C-600°C/0°C-1050°C respectively, and the resolution is 12bits/0.5°C for IC693TCM303.
OTHER SUPERIOR PRODUCTS
| Yasakawa Motor, Driver SG- |
Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
Emerson VE-,KJ- |
| Honeywell TC-,TK- |
GE Modules IC - |
| Fanuc motor A0- |
Yokogawa transmitter EJA- |
Contact person: Anna
E-mail: wisdomlongkeji@163.com
Cellphone: +0086-13534205279
SIMILAR PRODUCTS
IC693CPU351A IC693CPU351B IC693CPU351C
IC693CPU351D IC693CPU351E IC693CPU351F
IC693CPU351G IC693CPU351H IC693CPU351I
IC693CPU351J IC693CPU351K IC693CPU351L
IC693CPU351M IC693CPU351N IC693CPU351O
IC693CPU351P IC693CPU351Q IC693CPU351R
IC693CPU351S IC693CPU351T IC693CPU351U
IC693CPU351V IC693CPU351W IC693CPU351X
IC693CPU351Y IC693CPU351Z IC693CPU351-AA
IC693CPU351-AB IC693CPU351-AC IC693CPU351-AD
IC693CPU351-AE IC693CPU351-AF IC693CPU351-AG
IC693CPU351-AH IC693CPU351-BA IC693CPU351-BB
IC693CPU351-BC IC693CPU351-BD IC693CPU351-BE
IC693CPU351-BF IC693CPU351-BG IC693CPU351-BH
IC693CPU351-CA IC693CPU351-CB IC693CPU351-CC
IC693CPU351-CD IC693CPU351-CE IC693CPU351-CF
IC693CPU351-CG IC693CPU351-DA IC693CPU351-DB
IC693CPU351-DC IC693CPU351-DD IC693CPU351-DE
IC693CPU351-DF IC693CPU351-DG IC693CPU351-EA
IC693CPU351-EB IC693CPU351-EC IC693CPU351-ED
IC693CPU351-EE IC693CPU351-EF IC693CPU351-EG
IC693CPU351-FA IC693CPU351-FB IC693CPU351-FC
IC693CPU351-FD IC693CPU351-FE IC693CPU351-FF
IC693CPU351-FG IC693CPU351-GA IC693CPU351-GB
IC693CPU351-GC IC693CPU351-GD IC693CPU351-GE
IC693CPU351-GF IC693CPU351-GG IC693CPU351-BH
IC693CPU351-CH IC693CPU351-CJ IC693CPU351-DH
IC693CPU351-DJ IC693CPU351-DK IC693CPU351-EK
IC693CPU351-EL IC693CPU351-EM IC693CPU351-FM
IC693CPU351-GN IC693CPU351-GP IC693CPU351GR
IC693CPU351-GS IC693CPU351-GT IC693CPU351-HT
The Enhanced Genius Communications Module (GCM+), IC693CMM302, is an intelligent module that provides automatic global data communications between a Series 90-30 PLC and up to 31 other devices on a Genius bus. The GCM+ can be located in any standard Series 90-30 CPU baseplate, expansion baseplate, or remote baseplate. However, for most efficient operation, it is recommended that the module be installed in the CPU baseplate since the sweep impact time of the GCM+ module depends on the model of PLC and the baseplate where it is located. Note: if a GCM module is present in a system, GCM+ modules cannot be included in the system. Multiple GCM+ modules can be installed in a Series 90-30 PLC system with each GCM+ having its own Genius bus serving up to 31 additional devices on the bus. For example, this allows a Series 90-30 PLC with three GCM+ modules to exchange global data with as many as 93 other Genius devices automatically. In addition to basic global data exchange, the GCM+ module can be used for various applications such as: Data monitoring by a personal computer or an industrial computer. Monitoring data from Genius I/O blocks (although it cannot control Genius I/O blocks). Peer-to-peer communications among devices on the bus. Master-slave communications among devices on the bus (emulates remote I/O). The Genius bus connects to the terminal board on front of the GCM+ module
The LEDs on the front of the GBC indicate its operating status and should be on during normal operation. OK Shows the status of the GBC module. This LED turns on after power up diagnostics are completed. COM Shows the status of the Genius communications bus. This LED is on steadily when the bus is operating properly. It blinks for intermittent bus errors and is off for a failed bus. It is also off when no configuration has been received from the PLC CPU.