GE FANUC IC693PWR328 30 Watt Power Supply Module 90-30 Series PLC

 

GE Automation and Controls is the manufacturer of IC693PWR328. It acts as the power supply for the 90-30 Series PLC. It gives a power output of 30 watts for a nominal input of 48 Volts DC input voltage. The voltage range varies from 38 volts DC up to 56 Volts DC. This power supply provides the power outputs which include +5 Volts DC output, +24 Volts DC power output for relay modules, and +24 Volts DC output for isolated modules. The threshold for the combined total of every outputis 30 watts.

 

The user should consider some important specifications before configuring IC693PWR328. The user should keep a nominal voltage of 48 Volts DC for a range of input Voltage from 38 Volts DC to 56 Volts DC. The user should keep maximum of 50 watts input power at full load. The user can keep output power for 5 Volts DC maximum at 15 watts, 24 Volts DC Relay output maximum at 15 watts, and then 24 Volts DC isolated output at maximum 20 watts. The output voltage for 5 Volts DC is 5.0 to 5.2 Volts DC (5.1 Volts DC nominal). For 24 Volts DC Relay it is 24 Volts DC to 28 Volts DC, and for 24 Volts DC isolated it is 21.5 to 28 Volts DC. The protective limits for overvoltage and overcurrent for 5 Volts DC are 6.4V to 7V and 4A maximum respectively, with a holdup time of 14ms minimum. The power and current input calculations for the power supply use the least input voltage for determining the highest input current and allow a 10-20% margin for variations.

 

 

 

About IC693PWR328

The IC693PWR328 module is a standard power supply module made by GE Fanuc. It is a Series 90-30 GE device that works with Series 90-30 PLCs. It operates with an input voltage of 48 Volts DC and an output voltage of 24 Volts DC. The Series 90-30 PLCs and accessories like the power supply are some of the most stable PLCs available. The power supply can be used to meet different PLC application demands. The variety and flexibility of this series make industrial automation easy. The module offers high-level communication options with its RS-485 serial port. It can also be connected to a personal computer by using the serial port. The IC693PWR328 module plugs into the leftmost slot of the Series 90-30 baseplate. It has 3 different output capacities of 5 Volts DC with 15 Watts of output, 24 Volts DC isolated voltage with 20 Watts of output, and 24 Volts DC relay voltage with 15 Watts of output.

 

The GE Fanuc Series 90-30 IC693PWR328 power module comes with 4 system status indicators on the top side of the front faceplate. These indicators show the operating state of the power supply, the status of the PLC, whether the RUN mode of the unit is being used or not, and the battery condition of the unit. A battery compartment is present on the bottom side of the unit. Its purpose is to house the lithium back-up battery. This battery is connected to the module by using the battery connectors present inside the compartment cover. The side panel of the IC693PWR328 module has internal power sources and connections for AC/DC power sources. The IC693PWR328 module has 3 output voltages that are connected internally to the backplane on the baseplate. The voltage and power that are required by these modules are supplied through the baseplate connectors.

 

Specifications

 

Nominal Rated Voltage Input Voltage Range	48 VDC 38 to 56 VDC
Input Power Inrush Current	50 watts maximum at full load 4A peak, 100 ms maximum
Output Power	5 VDC: 15 watts maximum 24 VDC Relay: 15 watts maximum 24 VDC Isolated: 20 watts maximum NOTE: 30 watts maximum total (all three outputs)
Output Voltage	5 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) 24 VDC Relay: 24 to 28 VDC 24 VDC Isolated: 21.5 VDC to 28 VDC
Protective Limits Overvoltage: Overcurrent;	5 VDC output: 6.4 to 7 V 5 VDC output: 4 A maximum
Holdup Time:	14 ms minimum
Standards	Refer to data sheet, GFK-0867B, or later version for product standards, and general specifications.